USED BY EVERY FULL-TIME NHRA PRO CAR!!!!

We Now Use All Hoses & Dripless Fittings!! Upgrade Your Fittings Today!

NEW ADJUSTABLE/TALLER FRONT
& REAR DRAGSTER JACKS NOW AVAILABLE!

CALL TODAY FOR FURTHER INFORMATION!
(VIEW THE DRAGSTER PAGE FOR MORE PICTURES)

PROJACK RACE CAR STANDS CAN BE
CUSTOM BUILT FOR MOST CARS!

NEW NARROW COBALT / GTO JACK
AVAILABLE AND IN STOCK!

CALL TODAY FOR PRICING INFORMATION
1-800-755-JACK (5225)
ALL STANDARD DRAGSTER, FUNNY CAR AND DOOR CAR JACKS ARE IN STOCK!!!!

"THE ONLY LEGALLY PATENTED HYDRAULIC JACK - ACCEPT NO CHEAP IMITATION JACK SYSTEM"

U.S. Pat. No. 5,375,814 & Other Pat. Pending

ProJack Race Car Stands is the proud designer and creator of the ProJack race car lift system which has revolutionized the method in which race teams operate today. Car owners and crew chiefs alike are insisting on using ProJack lift systems as the safest and quickest way to lift their race cars. The ProJack system is so revolutionary that it has even been recognized by Car Craft Magazine and awarded for its contribution to racing. Thanks to the patented ProJack design, lifting a race car has truly become a “one-man job”.

A ProJack system can be designed to lift most any type of vehicle. ProJack systems are available in different sizes and lift heights and are fitted specifically for each race car. The lift systems have been designed with one-way adjustable flow control devices that make it possible to lower the car at a desired rate. A standard ProJack system comes with an air-over-hydraulic foot pedal pump with optional electric pumps available at various speeds. These electric model pumps have been custom designed to operate the lifting and lowering of the vehicle from a remote switch on a 25ft. cord.

The growing demand for the ProJack lift system can be attributed to it’s unique design characteristics. For instance, the ProJack’s design enable it to lift a race car without the lifts “arcing” as do regular floor jacks. This eliminates the dangerous “rolling” that a race car does when being lifted by traditional jack systems. Also, a ProJack lift only requires approximately two and one half inches clearance prior to lifting a vehicle. This is becoming even more beneficial with the specs of today’s race cars. Furthermore, once fully raised, the signature ProJack locking arms swing up into place and convert the lifts into a solid work stand. Combined with ProJack’s reputation of superior craftsmanship and using only durable high quality materials, ProJack Race Car Stands lift systems are the quickest yet safest way to lift a race car.

Whether in the shop or an unpaved pit area, ProJack Race Car Stands provide a consistent and dependable way to lift your race car. ProJack Race Car Stands have been racer tested and proven in the harshest of conditions and roughest of track-site locations. ProJack’s commitment to using only quality materials and superior hydraulic hardware insure that a ProJack system will continue to perform for years to come. Beware of cheap copies! Don’t be fooled by some “home-made” lifts or unsafe look alikes. The serious racer insists on the original ProJack Race Car Stands lift system.

CLICK ON LINKS BELOW TO VIEW OTHER AREAS OF THE WEBSITE


ProJack Race Car Stands Meets The NHRA Rule Book Requirements Under The General Regulations Section -

JACKS & JACKSTANDS
No work may be done under any car in the pit area while the car is supported by only one jack. Additional safety devices such as jackstands are mandatory to provide additional protection in the event of jack failure. Failure to observe this rule is grounds for immediate disqualification. Tube-chassis, Pro Stock-style vehicles must have cradles/jackstand devices that attach to the frame (conventional jackstands prohibited) when being worked on and/or when engine is running in pits with vehicle in a raised position. Jackstand devices must be constructed as to provide a minimum ground clearance of 7 inches as measured from the ground to the outer diameter limit of the rear tires.
 

The ProJack lifting system concept is our patented intellectual property. However, there are some chassis builders who feel stealing another persons ideas are justifiable. ProJack Race Car Stands is the original and patented jack that is geometrically correct and the safest jack on the market. They are also used by 90% of the pros in Drag Racing and is quoted that “ProJack provides a total professional look for between round maintenance while being the safest and fastest method of putting your race car in the air.”

Used &/or recommended by leading chassis builders; Jerry Haas Race Cars, Rick Jones RJ Race Cars, Don Ness RaceCraft, McKinney Corp, Brad Hadman, Skinny Kid Race Cars, Tim McAmis Race Cars and many other top builders.

IF YOU WANT TO BE A PRO OR LOOK LIKE A PRO...USE WHAT THE PROS USE!!!!


______________________________________________________________________

2636 W. 78th St. Hialeah, FL   33016
Toll Free: 800-755-JACK (5225)      Direct: (305) 821-2311      Fax: (305) 821-4707
Visa, Mastercard, Discover, American Express, C.O.D., Check, Cash

This site has been created and is maintained by Kim Marjama